Mai wanki

  • Makulli mai siffar tauraro

    Makulli mai siffar tauraro

    Sunan samfur Tauraron Kulle Washer
    Girman M3-24
    Kayan abu Karfe
    Maganin saman Baki
    Daidaitawa DIN/ISO
    Takaddun shaida ISO 9001
    Misali Samfuran Kyauta

     

     

     

  • DIN 434 Square Taper Washer

    DIN 434 Square Taper Washer

    Sunan samfur DIN434
    Girman M9-30A
    Daraja 4.8
    Kayan abu Karfe
    Maganin saman Zinc
    Daidaitawa DIN/ISO
    Takaddun shaida ISO 9001
    Misali Samfuran Kyauta
  • Maɗaukakin Flat Washers don Ƙungiyoyin Injin

    Maɗaukakin Flat Washers don Ƙungiyoyin Injin

    Professional bakin karfe lebur gasket, fastener tagulla guda launi karfe lebur kushin, lebur kushin M5, lebur kushin musamman, lebur gasket galvanized, lebur gasket bakin karfe, lebur kushin galvanized, lebur gasket, lebur gasket baƙin ƙarfe takardar, lebur gasket, factory kai tsaye wadata galvanized flat gasket matsananci-bakin ciki kushin da'ira da faci thickened lebur kushin kasa misali flat pad.

  • Matsakaicin Ƙarfi Mai Girma

    Matsakaicin Ƙarfi Mai Girma

    Na roba bude gasket bude spring wanki, bakin karfe spring wanki, harsashi kushin hade dunƙule, bullet kushin high ƙarfi spring wanki, harsashi kushin, harsashi kushin galvanized, harsa kushin inji dunƙule, harsashi kushin rawaya, harsashi ƙaho, harsashi kushin 201, harsashi kushin. lebur pad, harsashi kushin tagulla.

  • Wedge Anchor tare da Hex Nut Din934 da Flat Washer Din125, Carbon Karfe

    Wedge Anchor tare da Hex Nut Din934 da Flat Washe ...

    Girma: daidaitaccen, na musamman.
    Material: carbon karfe, gami karfe, bakin karfe, tagulla, da dai sauransu.
    Asalin: Yongnian, Hebei, China
    Ƙarshe: Filaye, galvanized (bayyanannu / blue / rawaya / baki), baki oxide, HDG, da dai sauransu.
    Shiryawa: kartani a girma (Max. 25KG), pallets na katako, musamman bisa ga takamaiman bukatun abokan ciniki.
    Aikace-aikace: Tsarin karfe, ginin ƙarfe, mai da gas, mota, kayan ado na gida, da dai sauransu.
    Gwaji kayan aiki: tebur kai tsaye karanta spectrometer, yankan inji, polishing inji, calipers, da dai sauransu.
    Minimumordel: Ba'a iyakance ga.
    Ƙarfin mu: sabis na tsayawa ɗaya, babban inganci, farashin gasa, bayarwa akan lokaci, tallafin fasaha, samar da kayan aiki da rahotannin gwaji.
    Sanarwa: Da fatan za a ba da Shawara GIRMA, KYAU, ABAYA KO GARA, SURFACE, idan an keɓance da fatan za a ba da zane ko girman.